if the idea transforms that way, it would be much better to change the fences in that matter, that they are availible like in the industry tiles, one fence on one side of the tile (and of course on all floors there) and on the ways up there shouldn't be a fence then. In my head i now have so many ideas for different tiles, but there should be a maximum, where it ends. I think there about a maximum of three or four floors, which are accessable like you want it i mean if you want all five floors accessable from the same point, a tile like i did now, or a tile from 0->1 ; 1->2 ; 2->3 ; 3->4 all single tiles so you can put them where you want. Also (if possible) doing cps for every single level, and MAYBE also for every way up. But for that i would need to put out my box of tricks. What do ya think about that?
I played around a little and indeed i have som tiles finished, based on that idea above. i have now of course the tile i made originally with fences on one side and on two sides, same with 2 and one floors, for each floor is one flat level, so one above ground, one above ground and level one, one above ground, level one and two and also with fences on either one or two sides. current Tile Number is 17. But i am thinking about more, as said, i am missing checkpoints, i still need one level more, and i dont what you to have to use all levels. For Example, you just want level 4, in current you would need to use the tile for all the levels but there has to be one for single level 4, single 3,2,1 and so on. Also there has to be combinations, for example if you want to use level 4 and 2 or level 3 and 2 or 3 and 1 or 1 and 4 ... i don't want to make this endless but i also want to give as much combinations space as possible. just like the tube tileset, which offers many many possibilites on how build tiles, if there were proper editor pics. maybe this will be similar, but the tubes went over 3 levels this will be 4 and tubes tiles were 69, lets see how many this will be, as said, i am at 17 tiles and i just began. For info: All ways up the levels are going to be in 2x2, because if in 1x1, it'll be too small. If you have any further ideas on this set, i am free for everthing